Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
86-373-2615111
Model No.: SD01250500
Brand: Shengda
Clapboard: without Clapboard
Filter Number: 1
Medium Material: Fiberglass
Filtration Grade: ULPA Filter
Type: Cartridge Filter
Packaging: Wooden Case
Productivity: 100 Thousands Annual
Transportation: Ocean,Land,Air
Place of Origin: Xinxiang
Supply Ability: 100 Thousands Annual
Certificate: ISO 9001, ISO 14001, ASME, OHS
HS Code: 8421299090
Port: Qingdao,Tianjin
Payment Type: T/T
Incoterm: FOB,CFR,CIF,FCA,CPT
PN: SD01250500
Flow m³/min/0.7MPa: 25
Flange Diameter: 328
Height: 500
It is our philosophy to constantly seek advanced filtration materials and design methods to meet the ever-changing needs of various compressor manufacturers. We have a long-term relationship with HV and Laydall filter manufacturers in the United States, which makes it reliable in terms of Oil Filter media. Through the instrument to analyze the multi-faceted data of the filter material, the oil filter material adapted to different working conditions.
Installation:
Install sealing correctly and check whether there is a conductive measure;
Return pipe must be long enough and put straight into the filter, the end should be beveled, pay attention to check blockage;
Use high-quality air filter, oil filter and coolant and prevent generation of impurities in hydraulic system.
Troubleshooting
I. the high oil content of the exhaust.
1. Return line blockage.
2. Gaskets used improperly resulting in oil core short circuit.
3. Oil Separator tank design or selection unreasonable.
4. Oil barrel oil level is too high.
5. Compressor Low pressure operation, the displacement increases, reduced Separation Filter.
6. Operating temperature is too high, increase the amount of lubricating oil evaporation.
7. Use of substandard lubricants.
Separation Efficiency
Under the rated flow rate and working pressure, outlet oil content: 0.1-3 mg/m³.
Note: The oil-gas separation filter can only achieve physical filtration, unable to capture the oil vapors in compressed gas; the above outlet oil content refers to the content of the non-gaseous oil aerosols. To get higher quality compressed air, after-filter is required.
Service life
Filter life consumption mainly shows in the form of the flow resistance increasing, so the service life is the primarily related to oil cleanness and filter properties. As long as the system is functioning properly, the service life can be up to 8000 hours(365 days no shut down), but no more than 10000 hours, the glass fiber falling down into the lubrication system causing secondary pollution should be prevented.
Flow Resistance
Flow resistance is an important indicator of filter performance. Under the premise of guaranteed filtration performance, lower flow resistance can reduce compressor energy consumption. Through several tests and improvement, the initial oil saturation pressure drop of oil-gas separation filter is within 16kpa, lower than the standard value 20kpa of peers.
Product Categories : Oil-Gas Separator > Compressor Filter
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.