Compressor Oil Gas Separator

PN: SD01045200
Flow m³/min/0.7MPa: 4.5

Flange Fiameter: 170
Height: 200

Depending on various design, the Oil-Gas Separator is composed of different layers. The first layer is typically coalescence layer, which is made of borosilicate glass fibers with a certain thickness and porosity, multilevel submicron glass fiber ensures at higher temperature to capture the tiny droplets of different lubricants efficiently. The second layer is separation layer, the large coalesced oil droplets go to bottom groove by separating layer.

If pre-separation of the oil filtration barrel is poor, the pre-Separation Filter layer is added to the outermost layer to prevent the coalescence layer overload and prolong life.

According to the requirements of the chemical industry and commerce association, the metal parts with oil and gas separation filter of the compressor has conductive connection, in order to reliably conducting static load. The appropriate sealing gaskets are selected ensuring a conductive connection to the compressor body.

Separation Efficiency

Under the rated flow rate and working pressure, outlet oil content: 0.1-3 mg/m³.

Note: The oil-gas separation filter can only achieve physical filtration, unable to capture the oil vapors in compressed gas; the above outlet oil content refers to the content of the non-gaseous oil aerosols. To get higher quality compressed air, after-filter is required.

Service life

Filter life consumption mainly shows in the form of the flow resistance increasing, so the service life is the primarily related to oil cleanness and filter properties. As long as the system is functioning properly, the service life can be up to 8000 hours(365 days no shut down), but no more than 10000 hours, the glass fiber falling down into the lubrication system causing secondary pollution should be prevented.

Flow Resistance

Flow resistance is an important indicator of filter performance. Under the premise of guaranteed filtration performance, lower flow resistance can reduce compressor energy consumption. Through several tests and improvement, the initial oil saturation pressure drop of oil-gas separation filter is within 16kpa, lower than the standard value 20kpa of peers.